Description
MTS Technik Coilovers (Street, Inox) for Volkswagen SCIROCCO III (137/138)
RELIABLE AND AFFORDABLE STREET SUSPENSION FROM MTS TECHNIK Street: The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.Key Features
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Features by configuration
XMTSGWVW94 — Camber adjustable (front):
The camber plates allow the wheel angle adjustment and increase the precision of driving.
Configuration & specifications
| XMTSGWVW36 | XMTSGWVW94 | |
|---|---|---|
| Configuration | ||
| Top mounts | Stock (not included) | Camber adjustable (front) |
| Variant note | multilink rear suspension | multilink rear suspension |
| Lowering (mm) | ||
| Front | 25 - 50 mm | 25 - 50 mm |
| Rear | 25 - 50 mm | 25 - 50 mm |
| Axle load (kg) | ||
| Front | -1090 kg | -1090 kg |
| Rear | -880 kg | -880 kg |
| Spring rates (N/mm) | ||
| Front main spring | 32 N/mm | 32 N/mm |
| Rear main spring | 27 - 40 - 45 N/mm | 27 - 40 - 45 N/mm |
| Approval | ||
| TÜV | yes | no |
| Documents | ||
| Downloads | ⬇ Installation manual ⬇ Spare parts list ⬇ TÜV certificate | ⬇ Installation manual ⬇ Camber assembly manual ⬇ Spare parts list |
Notes
• Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).• If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request!
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
• Rear thread adjustment block is mounted on the top.
• Only suitable for multilink suspension.
• For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
This Kit will fit the following Vehicles:
Volkswagen BEETLE (5C1/5C2) - 2.5 / 1.2 TSI / 1.2 TSI 16V / 1.4 TSI / 1.6 TDI / 2.0 TDI / 2.0 TFSI / 2.0 TSI
Volkswagen BEETLE Convertible (5C7/5C8) - 2.5 / 1.2 TSI / 1.2 TSI 16V / 1.4 TSI / 1.6 TDI / 2.0 TDI / 2.0 TFSI / 2.0 TSI
Volkswagen SCIROCCO III (137/138) - 1.4 TSI / 2.0 R / 2.0 TDI / 2.0 TFSI / 2.0 TSI
MTS TECHNIK PART NUMBER:
XMTSGWVW36
XMTSGWVW94 — Camber Front