Description
MTS Technik Coilovers (Street, Inox) for Volkswagen CADDY I (14)
RELIABLE AND AFFORDABLE STREET SUSPENSION FROM MTS TECHNIK Street: The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.Key Features
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Features by configuration
XMTSGWVW84 — Camber adjustable (front):
The camber plates allow the wheel angle adjustment and increase the precision of driving.
Configuration & specifications
| XMTSGWVW02 | XMTSGWVW84 | |
|---|---|---|
| Configuration | ||
| Top mounts | Stock (not included) | Camber adjustable (front) |
| Lowering (mm) | ||
| Front | 35 - 80 mm | 35 - 80 mm |
| Rear | 50 - 120 mm | 50 - 120 mm |
| Axle load (kg) | ||
| Front | -785 kg | -785 kg |
| Rear | -960 kg | -960 kg |
| Spring rates (N/mm) | ||
| Front main spring | 50 N/mm | 50 N/mm |
| Front helper spring | 20 N/mm | 20 N/mm |
| Approval | ||
| TÜV | yes | no |
| Documents | ||
| Downloads | ⬇ Installation manual ⬇ Spare parts list ⬇ TÜV certificate | ⬇ Installation manual ⬇ Camber assembly manual ⬇ Spare parts list |
Notes
• Not for 4x4.• 6-point adjustable rear axle.
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• Installation of the rear axle adjustment must be carried out in accordance with the instructions.
• For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
This Kit will fit the following Vehicles:
Volkswagen CADDY I (14) - 1.5 / 1.6 / 1.6 D / 1.8
MTS TECHNIK PART NUMBER:
XMTSGWVW02
XMTSGWVW84 — Camber Front