Description
MTS Technik Coilovers (Street, Inox) for Ford USA MUSTANG 6 Coupe
RELIABLE AND AFFORDABLE STREET SUSPENSION FROM MTS TECHNIK Street: The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.Key Features
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Features by configuration
XMTSGWFO25 — Camber adjustable (front):
The camber plates allow the wheel angle adjustment and increase the precision of driving.
Configuration & specifications
| XMTSGWFO24 | XMTSGWFO25 | |
|---|---|---|
| Configuration | ||
| Top mounts | Stock (not included) | Camber adjustable (front) |
| Lowering (mm) | ||
| Front | 20 - 65 mm | 20 - 65 mm |
| Rear | 20 - 70 mm | 20 - 70 mm |
| Axle load (kg) | ||
| Front | -1100 kg | -1100 kg |
| Rear | -1150 kg | -1150 kg |
| Spring rates (N/mm) | ||
| Front main spring | 55 N/mm | 55 N/mm |
| Rear main spring | 145 N/mm | 145 N/mm |
| Approval | ||
| TÜV | no | no |
| Documents | ||
| Downloads | ⬇ Installation manual ⬇ Spare parts list | ⬇ Installation manual ⬇ Camber assembly manual ⬇ Spare parts list |
Notes
• Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).• Only for vehicles without electronic damping.
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• Rear thread adjustment block is mounted on the top.
• Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
This Kit will fit the following Vehicles:
Ford USA MUSTANG 6 Convertible - 2.3 EcoBoost / 3.7 V6 / 5.0 V8
Ford USA MUSTANG 6 Coupe - 2.3 EcoBoost / 3.7 V6 / 5.0 V8 / 5.0 V8 Bullitt / 5.2 Shelby GT350 / 5.2 Shelby GT500 / EcoBoost / V8 GT
MTS TECHNIK PART NUMBER:
XMTSGWFO24
XMTSGWFO25 — Camber Front