Description
MTS Technik Coilovers (Street, Gold) for Chrysler 300C (LX)
RELIABLE AND AFFORDABLE STREET SUSPENSION FROM MTS TECHNIK Street: The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.Key Features
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Configuration & specifications
| MTSGWDO01 | |
|---|---|
| Configuration | |
| Top mounts | Stock (not included) |
| Lowering (mm) | |
| Front | 30 - 80 mm |
| Rear | 30 - 90 mm |
| Axle load (kg) | |
| Front | -1275 kg |
| Rear | -1275 kg |
| Spring rates (N/mm) | |
| Front helper spring | 20 N/mm |
| Front main spring | 84 N/mm |
| Rear main spring | 122 N/mm |
| Approval | |
| TÜV | no |
| Documents | |
| Downloads | ⬇ Installation manual ⬇ Spare parts list |
Notes
• Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).• Not for 4x4.
• Only for vehicles without NIVO / OEM pneumatic suspension.
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• Rear thread adjustment block is mounted on the top.
This Kit will fit the following Vehicles:
Chrysler 300C (LX) - 6.4 / 3.6 / 5.7 / 3.6 Flexfuel / 5.7 Flexfuel
Dodge Challenger 3 Coupe - 6.4 / 3.5 / 3.6 / 5.7 / 3.6 Flexfuel / 6.4 SRT8
Dodge Charger 7 - 3.6 / 3.6 Flexfuel / 5.7 R/T / 6.4 SRT8
Lancia THEMA (LX) - 3.6 / 3.0 D
MTS TECHNIK PART NUMBER:
MTSGWDO01
