Description
MTS Technik Coilovers (Stance, Inox) for Audi TT (8N) / Volkswagen GOLF IV (1J1)
RELIABLE AND AFFORDABLE STANCE SUSPENSION FROM MTS TECHNIK Stance: The Stance series suspension is an offer for lovers of significant lowering and stiffer characteristics, a set dedicated to demanding drivers.Key Features
Features by configuration
XMTSGWVW88-S — Camber adjustable (front):
Configuration & specifications
| XMTSGWVW11-S | XMTSGWVW88-S | |
|---|---|---|
| Configuration | ||
| Top mounts | Stock (not included) | Camber adjustable (front) |
| Lowering (mm) | ||
| Front | 25 - 50 mm | 25 - 50 mm |
| Rear | 25 - 50 mm | 25 - 50 mm |
| Axle load (kg) | ||
| Front | -1110 kg | -1110 kg |
| Rear | -1080 kg | -1080 kg |
| Spring rates (N/mm) | ||
| Front main spring | 90 N/mm | 90 N/mm |
| Front helper spring | 20 N/mm | 20 N/mm |
| Rear main spring | 100 - 120 N/mm | 100 - 120 N/mm |
| Approval | ||
| TÜV | yes | no |
| Documents | ||
| Downloads | ⬇ Installation manual ⬇ Spare parts list ⬇ TÜV certificate | ⬇ Installation manual ⬇ Camber assembly manual ⬇ Spare parts list |
Notes
• Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).• Stabilizer bars may need to be changed with longer ones if lowering more than 40mm.
• If the right drive shaft diameter of more than 42 mm, the maximum lowering mentioned in the catalogue is reduced by 15 mm.
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.
Notes by configuration
XMTSGWVW88-S — Camber adjustable (front):
- Rear thread adjustment block is mounted on the top.
- Only for 4x4 models.
This Kit will fit the following Vehicles:
Audi A3 (8L) - 1.8 T quattro / 1.9 TDI quattro / S3 quattro
Audi TT (8N) - 1.8 T quattro / 3.2 VR6 quattro
Audi TT Roadster (8N) - 1.8 T quattro / 3.2 VR6 quattro
Seat LEON (1M) - 1.8 20V T 4 / 1.9 TDI Syncro / 2.8 Cupra 4
Skoda OCTAVIA I (1U) - 1.8 T 4x4
Skoda OCTAVIA I Combi (1U) - 1.8 T 4x4 / 1.9 TDI 4x4 / 2.0 4x4
Volkswagen BORA I (1J2) - 1.8 4motion / 1.9 TDI 4motion / 2.0 4motion / 2.3 V5 4motion / 2.8 V6 4motion
Volkswagen BORA Variant (1J6) - 1.8 4motion / 1.9 TDI 4motion / 2.0 4motion / 2.3 V5 4motion / 2.8 V6 4motion
Volkswagen GOLF IV (1J1) - 1.8 4motion / 1.9 TDI 4motion / 2.0 4motion / 2.3 V5 4motion / 2.8 VR6 4motion / 3.2 R32 4motion
Volkswagen GOLF IV Variant (1J5) - 1.8 4motion / 1.9 TDI 4motion / 2.0 4motion / 2.3 V5 4motion / 2.8 V6 4motion
Volkswagen NEW BEETLE (9C1/1C1) - 3.2 RSI 4motion (1C9)
MTS TECHNIK PART NUMBER:
XMTSGWVW11-S
XMTSGWVW88-S — Camber Front