Exhaust Rear Chassis Exhaust Mount Bush - EXH020BLK EXH020BLK is designed to replace the usually broken internal rubber bush and fits into the original bracket. This new part can be easily fitted by simply cutting the remnants of the rubber webbing from...

Rear Shock Top Mount Upper Bush - 2 x PFR19-220BLK Diagram Reference20 CompoundBlack Series Location on VehicleRear AdjustmentFixed Included in the Kit: 2 x PFR19-220BLK - Rear Shock Top Mount Upper Bush #N/A #N/A To...

Front Lower Rear Engine Mount Insert - PFF80-1120 Not recommended for 3cyl or diesel engined vehicles due to the potential for increased vibration. PFF80-1120 fits this type of mount only. Please check the picture below before ordering Diagram...

Front Engine Mounting Insert (Diesel) - PFF80-1420R Fits 1.8 and 2.0L diesel models. For petrol-engined vehicles use PFF80-1420. This part is designed to fit into the original voided rubber mount which degrades and softens over time, allowing for...

Front Lower Torque Mount Insert - PFF25-1220BLK Diagram Reference20 CompoundBlack Series Location on VehicleFront AdjustmentFixed Included in the Kit: 1 x PFF25-1220BLK - Lower Torque Mount Insert To fit the following...

Front Lower Rear Engine Mount Bush - Fast Road/Track - 70mm - PFF50-306P Only fits vehicles with cast aluminium engine bush mounting brackets. It will not fit the pressed steel torque link (part no. 1806.A0 / 1806.H0) as fitted to 2.0 HDi. 2.0 16v or 308...

Front Lower Rear Engine Mount Insert - PFF80-1120BLK Not recommended for 3cyl or diesel engined vehicles due to the potential for increased vibration. PFF80-1120 fits this type of mount only. Please check the picture below before ordering Diagram...

Front Lower Torque Mount - Fast Road - PFF26-122 PFF26-122 Lower Torque Mount - Fast Road is an anodised CNC-Machined 6082 Aluminium mount pre-fitted with our Yellow 70A and Black 95A polyurethane bushes, for a true bolt-off, bolt-on replacement, with no...

Front Lower Torque Mount - Motorsport - PFF26-122-12BLK PFF26-122-12BLK Lower Torque Mount - Motorsport uses our Black 95A material for all bush components to maximise mount stiffness, resulting in a mega 1300% increase over the stock mount for...

Front Lower Rear Engine Mount Bush - Diesel Engine - 70mm - PFF50-306R Only fits vehicles with cast aluminium engine bush mounting brackets. It will not fit the pressed steel torque link (part no. 1806.A0 / 1806.H0) as fitted to 2.0 HDi. 2.0 16v or 308...

Front Lower Engine Mount - PFF50-106 A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine/transmission and chassis. The harder the material used, the greater the NVH transmitted, especially...

Front Gearbox Mount Insert - PFF19-620 Made from our Yellow 70A material and bespoke design to significantly reduce engine movement and improve power delivery and driving feel Diagram Reference20 CompoundRoad Series Location on...