null
Skip to main content

MTS Technik Coilovers (Street, Inox) for Volkswagen GOLF II (19E/1G1)

SKU:
XMTSGWVW08
UPC:
5903855651746
Shipping:
Calculated at Checkout
  • MTS Technik Coilovers (Street, Inox) for Volkswagen GOLF II (19E/1G1)
  • MTS Technik Coilovers (Street, Inox) for Volkswagen GOLF II (19E/1G1)
  • MTS Technik Coilovers (Street, Inox) for Volkswagen GOLF II (19E/1G1)
  • MTS Technik Coilovers (Street, Inox) for Volkswagen GOLF II (19E/1G1)
1.110,53€

Description

MTS Technik Coilovers (Street, Inox) for Volkswagen GOLF II (19E/1G1)

RELIABLE AND AFFORDABLE STREET SUSPENSION FROM MTS TECHNIK

Street: The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.

Key Features

2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Features by configuration

XMTSGWVW86 — Camber adjustable (front):

The camber plates allow the wheel angle adjustment and increase the precision of driving.
Configuration & specifications
XMTSGWVW08XMTSGWVW86
Configuration
Top mountsStock (not included)Camber adjustable (front)
Lowering (mm)
Front25 – 80 mm30 - 80 mm
Rear25 – 80 mm25 – 80 mm
Axle load (kg)
Front-980 kg-980 kg
Rear-880 kg-880 kg
Spring rates (N/mm)
Front main spring60 N/mm60 N/mm
Front helper spring20 N/mm20 N/mm
Rear main spring60 N/mm60 N/mm
Rear helper spring20 N/mm20 N/mm
Approval
TÜVyesno
Documents
Downloads⬇ Installation manual
⬇ Spare parts list
⬇ TÜV certificate		⬇ Installation manual
⬇ Camber assembly manual
⬇ Spare parts list
Notes

• Front and rear axle height adjustable (threaded shock absorber housing).
• Not for 4x4.
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

This Kit will fit the following Vehicles:

Seat TOLEDO I (1L) - 1.6 i / 2.0 i / 1.9 TDI / 1.9 TD / 1.9 D / 1.8 i / 1.8 16V / 2.0 i 16V

Volkswagen CORRADO (53I) - 2.9 VR6 / 1.8 G60 / 2.0 i / 2.0 i 16V / 1.8 16V

Volkswagen GOLF II (19E/1G1) - 1.3 / 1.8 i Cat / 1.8 GTI G60 / 1.8 GTI Cat / 1.8 GTI 16V / 1.8 GTI / 1.6 / 1.3 Cat / 1.0 / 1.6 D / 1.8 / 1.6 TD

Volkswagen GOLF III (1H1) - 1.9 TD, GTD / 2.8 VR6 / 2.0 GTI 16V / 1.4 / 1.9 TDI / 1.9 SDI / 1.9 D / 2.0 / 2.0 GL / 1.8 / 1.6

Volkswagen GOLF III Convertible (1E7) - 1.8 / 1.6 / 1.9 TDI / 2.0

Volkswagen GOLF IV Convertible (1E7) - 1.6 / 1.8 / 1.9 TDI / 2.0

Volkswagen JETTA II (19E/1G2) - 1.8 Cat / 1.8 16V / 1.8 / 1.6 TD / 1.6 D / 1.6 / 1.3 Cat / 1.3

Volkswagen VENTO (1H2) - 1.4 / 1.6 / 1.8 / 2.8 VR6 / 2.0 GL / 2.0 / 1.9 TDI / 1.9 TD / 1.9 SDI / 1.9 D

MTS TECHNIK PART NUMBER:

XMTSGWVW08
XMTSGWVW86 — Camber Front

View Full Description Hide Full Description
SUBSCRIBE