Description
MTS Technik Coilovers (Street, Inox) for BMW 7 (E32)
RELIABLE AND AFFORDABLE STREET SUSPENSION FROM MTS TECHNIK Street: The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.Key Features
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
The camber plates allow the wheel angle adjustment and increase the precision of driving.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Additional height adjustment at the bottom mounting, allowing the car's height reduction to be changed, without interfering with the spring operation characteristics.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Stainless steel threaded shock absorbers.
Configuration & specifications
| XMTSGWBM27 | |
|---|---|
| Configuration | |
| Top mounts | Camber adjustable (front) |
| Front strut | 55 mm |
| Lowering (mm) | |
| Front | 30 - 120 mm |
| Rear | 30 - 80 mm |
| Axle load (kg) | |
| Front | -1110 kg |
| Rear | -1280 kg |
| Spring rates (N/mm) | |
| Front main spring | 80 N/mm |
| Front helper spring | 20 N/mm |
| Rear main spring | 84 N/mm |
| Rear helper spring | 20 N/mm |
| Approval | |
| TÜV | no |
| Documents | |
| Downloads | ⬇ Installation manual ⬇ Camber assembly manual ⬇ Spare parts list |
Notes
• Front and rear axle height adjustable (threaded shock absorber housing).• Only for vehicles without electronic damping.
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• Independent height adjustment at the lower brackets on the front dampers.
• The kit includes 2 upper front camber plates.
• The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
• Including M-Technik.
• For vehicles equipped with NIVO, additional original parts will be required. REAR AXLE: 2x upper mounts (BMW part number: 33521132088) and 4 x 303202060. To purchase 303202060, please contact the MTS Technik Company.
This Kit will fit the following Vehicles:
BMW 7 (E32) - 730 i, iL / 730 i, iL V8 / 735 i, iL / 740 i, iL V8 / 750 i, iL V12
MTS TECHNIK PART NUMBER:
XMTSGWBM27 — Camber Front