Description
MTS Technik Coilovers (Street, Gold) for BMW 7 (E65)
RELIABLE AND AFFORDABLE STREET SUSPENSION FROM MTS TECHNIK Street: The Street series suspension is the default configuration of MTS Technik engineers, it guarantees a wide range of lowering and a balance between comfort and stiffness.Key Features
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Configuration & specifications
| MTSGWBM30 | |
|---|---|
| Configuration | |
| Top mounts | Stock (not included) |
| Lowering (mm) | |
| Front | 40 - 75 mm |
| Rear | 30 - 80 mm |
| Axle load (kg) | |
| Front | -1295 kg |
| Rear | -1410 kg |
| Spring rates (N/mm) | |
| Front main spring | 80 N/mm |
| Front helper spring | 20 N/mm |
| Rear main spring | 84 N/mm |
| Rear helper spring | 20 N/mm |
| Approval | |
| TÜV | yes |
| Documents | |
| Downloads | ⬇ Installation manual ⬇ Spare parts list ⬇ TÜV certificate |
Notes
• Front and rear axle height adjustable (threaded shock absorber housing).• Only for vehicles without EDC.
• Only for vehicles without electronic damping.
• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• Including M-Technik.
• Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
• Installation is also possible on vehicles equipped with NIVO / factory pneumatic suspension. In this case the assembly is possible only after the disassembly of the factory pneumatic system. In some cases, it may be necessary to use additional OEM Audi parts.
• Vehicles equipped with NIVO will need additional OE parts. REAR AXLE: 2x top mount (BMW part no: 33526779611), 2x spring shim upper (BMW part no: 33536753765), 2x supporting cup (BMW part no: 33526758283), 2x upper plate (BMW part no: 33526779415).
This Kit will fit the following Vehicles:
BMW 7 (E65) - 730 d / 730 i, Li / 730 Ld / 735 i / 735 i, Li / 740 d / 740 i, Li / 745 d / 745 i, Li / 750 i, Li / 760 i / 760 i, Li
MTS TECHNIK PART NUMBER:
MTSGWBM30