Description
MTS Technik Coilovers (Stance, Gold) for BMW 7 (E23)
RELIABLE AND AFFORDABLE STANCE SUSPENSION FROM MTS TECHNIK Stance: The Stance series suspension is an offer for lovers of significant lowering and stiffer characteristics, a set dedicated to demanding drivers.Key Features
2 year warranty with no mileage limit to confirm high quality.
Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
The use of twin-tube technology guarantees stable shock absorber performance.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
The camber plates allow the wheel angle adjustment and increase the precision of driving.
Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Additional height adjustment at the bottom mounting, allowing the car's height reduction to be changed, without interfering with the spring operation characteristics.
Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Coilover springs made by Eibach, the world leader in the sport springs industry.
Configuration & specifications
| MTSGWBM29-S | MTSGWBM58-S | |
|---|---|---|
| Configuration | ||
| Top mounts | Camber adjustable (front) | Camber adjustable (front) |
| Front strut | 52 mm | 52 mm |
| Lowering (mm) | ||
| Front | 35 - 95 mm | 35 - 95 mm |
| Rear | 20 - 110 mm | 20 - 110 mm |
| Axle load (kg) | ||
| Front | -1040 kg | -1040 kg |
| Rear | -1150 kg | -1150 kg |
| Spring rates (N/mm) | ||
| Front main spring | 80 N/mm | 80 N/mm |
| Front helper spring | 20 N/mm | 20 N/mm |
| Rear main spring | 70 N/mm | 70 N/mm |
| Rear helper spring | 20 N/mm | 20 N/mm |
| Approval | ||
| TÜV | no | no |
| Documents | ||
| Downloads | ⬇ Installation manual ⬇ Camber assembly manual ⬇ Spare parts list | ⬇ Installation manual ⬇ Camber assembly manual ⬇ Spare parts list |
Notes
• Front and rear axle height adjustable (threaded shock absorber housing).• If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• Independent height adjustment at the lower brackets on the front dampers.
• The kit includes 2 upper front camber plates.
• The installation requires the use of OE front struts - they should be cut and welded as described in the attached manual.
• In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set.
• Including M-Technik.
• In the case of cars equipped with Nivo, it will be required to replace the rear top mounts with OEM: 33521117657 or 33521126987.
Notes by configuration
MTSGWBM29-S — Camber adjustable (front):
- Only suitable for vehicles manufactured from 09/1981.
- Suspension compatible only with a rear top mount with an internal diameter of 78mm - OEM number: 33521117657 or 33521126987. It is possible to mount the suspension to cars equipped with other top mounts, but original parts marked with one of the above numbers will be required.
MTSGWBM58-S — Camber adjustable (front):
- Suspension compatible only with a rear top mount with an inner diameter of 83mm - OEM number: 33521117997.
This Kit will fit the following Vehicles:
BMW 7 (E23) - 728 / 730 / 728 i / 732 i / 733 i / 735 i / 745 i
MTS TECHNIK PART NUMBER:
MTSGWBM29-S — Camber Front
MTSGWBM58-S — Camber Front