Chassis & Suspension

Front Wishbone Rear Bush - 2 x PFF16-802 Diagram Reference2 CompoundRoad Series Location on VehicleFront AdjustmentFixed Included in the Kit: 2 x PFF16-802 - Front Wishbone Rear Bush Replaces Part...

Front Wishbone Rear Bush - 2 x PFF12-702 PFF12-702 is a three-part polyurethane sliding bush design for increased articulation, held securely between two CNC machined stainless steel sleeves Diagram Reference2 CompoundRoad Series Location on...

Front Lower Wishbone Rear Bush - 2 x PFF1-802BLK These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the...

Front Lower Wishbone Rear Bush - 2 x PFF1-802H These bushes are designed to fit genuine control arms. If non-genuine arms are fitted and you find the stainless steel sleeve does not fit onto the wishbone, please contact us with dimensions of the wishbone...

Front Wishbone Rear Bush - 47mm Long - 2 x PFF12-1106 This bush kit incorporates anti-lift properties by lowering the rear of the arm by 10mm Size47mm Long Diagram Reference2 CompoundRoad Series Location on VehicleFront AdjustmentFixed Included in...

Front Lower Arm Rear Bush - 54mm - 2 x PFF1-502 Fits models from around 2007 on with 54mm wide bracket. PFF1-502-46 Fits early models up to around 2007 with a 46mm wide bracket.PFF1-502 Fits later model from around 2007 on with 54mm wide...

Front Upper Wishbone Front Bush - 2 x PF8-902 This part will not fit vehicles with the later spec headlight/indicator bracket where it fits the wishbone mounting. The supplied bolt is too short because of the extra width of the bracket. Made using our...

Front Wishbone Rear Bush - 2 x PFF19-2202 PFF19-2202 Front Arm Rear Bush uses a CNC machined and plated mild steel shell and our Black 95A bush with a tapered bore design to allow for articulation, whilst improving steering precision and braking...

Front Arm Rear Bush - 56mm OD with 14mm ID - 2 x PFF12-201-56BLK This is used on the front and rear positions. You will need to order 4 bushes for a complete car set Size56mm OD with 14mm ID Diagram Reference2 CompoundBlack Series Location on...

Front Wishbone Rear Bush Caster offset - 2 x PFF19-1102G PFF19-1102G Front Wishbone Rear Bush Caster Offset is a CNC-machined Aluminium mount with an 80A durometer polyurethane bush providing approx. 1 of caster offset to improve in-corner camber gain...

Front Wishbone Rear Bush - 2 x PFF12-802 This part will not fit models where the vehicle ride-height sensor attaches to the wishbone bracket Diagram Reference2 CompoundRoad Series Location on VehicleFront AdjustmentFixed Included in the Kit: 2 x...

Front Wishbone Rear Bush Anti-Lift & Caster offset - 2 x PFF19-1002GBLK PFF19-1002G adds 1 degree of caster offset for a greater tyre contact area, which, in turn, provides greater feedback information to the driver, improves traction and offers greater...